sand in well water
Spin Down Sediment Filter for Well Water: Catch Grit Early

A spin down sediment filter for well water uses a reusable screen to catch coarse sand and grit before they reach household fixtures and equipment. It doesn't use a disposable cartridge. A stainless steel screen catches the debris, and you rinse it out through a valve at the bottom of the bowl. Recurring coarse grit in toilet tanks or faucet aerators is a reason to consider a screen.
Sand can clog showerheads, wear valves and collect in the bottom of a water heater. A reusable screen catches coarse grit before it reaches those fixtures and appliances.
What Sand in Well Water Is Telling You
Sand can come from the aquifer or enter through a worn or poorly sized well screen. Rust and other particles can also come from household plumbing.
The signs usually show up at the fixtures first:
- Grit or sand at the bottom of the toilet tank.
- Faucet aerators and showerheads that clog and lose pressure.
- A sandy layer in a glass of water after it sits for a few minutes.
- Washing machine or dishwasher inlet screens that keep filling with debris.
- Sediment in the bottom of the water heater.
A sudden jump in sand is worth a call to your well contractor, because it can point to a problem with the well itself. A steady, low level of grit is what a sediment filter is built for.
Sand also isn't the only thing to check. The EPA tells private well owners to test their well annually for total coliform bacteria, nitrates, total dissolved solids and pH. It also advises testing for other suspected contaminants and testing right away after a well repair or a change in water quality. Use a certified drinking water lab to check for bacteria and other contaminants, even when the water looks clear.
How a Spin Down Sediment Filter Works
Water passes through a reusable screen that catches coarse particles. The rinse valve lets you flush out collected grit.
Three things make this design a good fit for well water:
- You can see it. On a model with a clear bowl, you can see when sand is building up.
- You can rinse the screen. The rinse valve flushes out collected sediment.
- The screen is reusable. Sediment can build up on the screen. Rinsing helps clear the grit so you can keep using it.
Follow your model's manual for flushing and local plumbing code for routing the rinse water.
What "90 Micron" Means
A micron is a unit of size. A 90-micron screen is designed to catch coarse particles such as sand and grit. Smaller particles, including fine silt and clay, can pass through. Cloudiness can also come from tiny air bubbles.
That's why many well systems use two stages of sediment protection:
| Stage | What it does | Maintenance |
|---|---|---|
| Spin down screen (coarse) | Catches sand and grit first | Rinse through the bottom valve |
| Cartridge filter (fine, such as 5 micron) | Can catch some of the finer sediment that passes through the coarse screen | Replace the cartridge on schedule |
Putting the coarse screen first lets the finer cartridge handle the smaller particles that pass through.
Where It Goes in a Well Water System
In a typical well system, a spin down filter goes on the main line after the pressure tank and pressure switch. A common layout is:
- Well pump, pressure tank and pressure switch.
- Spin down sediment filter.
- Fine sediment cartridge, if you use one.
- Treatment equipment, such as an iron, sulfur and manganese filter or a water softener.
Catching coarse grit before it reaches treatment equipment reduces the amount of sediment that gets to downstream valves and screens.
Leave room to reach the rinse valve and read the gauges. Follow the filter manual and local plumbing code for placement and drain routing. A licensed plumber can confirm where it fits in your well system.
RKIN Self-Rinsing Spin Down 90 Micron Sediment Filter
RKIN's Self-Rinsing Spin Down 90 Micron Sediment Filter is built for exactly this job. It's made in Italy around a long-lasting 90 micron stainless steel screen cartridge, with high-flow 1" NPT connections. From the product page:
- Flow rate: 27 gallons per minute, with a pressure drop of 2.61 psi at that flow rate, and less at lower flow rates.
- Operating pressure: 26 psi minimum, 125 psi maximum.
- Two pressure gauges. The two gauges let you compare pressure before and after the screen.
- In the box: a mounting bracket, a wrench and a backflow-preventing drain funnel.
- Temperature range: 39.2°F to 113°F. It's for cold water lines.
The screen is self-cleaning, so it has no scheduled replacement. Inspect the internal O-rings every 2 years. For hot-water applications, the RKIN Dragon HOT Self-Rinsing Spin Down 90 Micron Sediment Filter is designed for higher temperatures.
After a rinse, note the difference between the two gauges while water is running. A larger pressure difference at a similar flow rate can be a sign that grit is building up.
Signs Your Spin Down Filter Needs Attention
Check the filter when you notice any of these signs:
- A visible layer of sand in the bowl.
- If your model has two gauges, look for a larger pressure difference at a similar flow rate.
- Lower pressure at your faucets and showers.
- Sand showing up at fixtures again after a long stretch without it.
How often you rinse depends on how fast sediment collects. Follow the manual and check the filter more often if sand starts building up faster.
When a Spin Down Filter Isn't Enough
A sediment screen catches particles such as sand and grit. Bacteria, dissolved iron, manganese, hydrogen sulfide and hardness minerals can pass through. Keep up with well testing even if the screen clears the visible grit.
If you notice new stains, odors or scale, test your well water before choosing treatment. If a result exceeds a drinking water health standard, contact your local public health department for guidance and have the well retested. And if the bowl fills with sand within days, or the amount suddenly jumps, call your well contractor before adding more filtration. The fix may be at the well.
Choosing a Spin Down Filter for Your Well
If you keep brushing sand out of faucet aerators, a reusable screen gives you one place to catch and rinse away the grit. Compare the flow and pressure specs of the RKIN Self-Rinsing Spin Down 90 Micron Sediment Filter with what your well delivers and what your household needs.
Frequently Asked Questions
What does a spin down sediment filter do for well water?
It catches sand, grit and other coarse particles on a reusable screen before the water reaches fixtures and treatment equipment downstream of the filter. You flush the collected sediment out through a valve at the bottom of the bowl instead of replacing a cartridge.
Where should a spin down filter be installed on a well system?
In a typical well setup, the filter goes on the main line after the pressure tank and pressure switch, ahead of the equipment it is intended to protect. Confirm the layout and drain routing against the filter manual and local plumbing code.
How often should I flush a spin down filter?
Follow your model's manual. Visible grit can signal that the screen needs attention. If your model has two gauges, a larger pressure difference at a similar flow rate can also be a clue.
Will a 90 micron filter remove fine silt or cloudy water?
A 90-micron screen is designed for coarse sand and grit. Fine silt can pass through. If fine sediment is causing the cloudiness, a finer cartridge may help. Cloudiness can have other causes, including air bubbles.
Does a spin down filter remove iron or sulfur smell?
A sediment screen can catch iron particles large enough for the screen to trap. Dissolved iron and hydrogen sulfide can pass through. Test your well water if you notice new stains or a sulfur smell.
Do I need to replace the screen in the RKIN Self-Rinsing Spin Down 90 Micron Sediment Filter for cold water?
The stainless steel screen is self-cleaning, so it has no scheduled replacement. Inspect the internal O-rings every 2 years, and keep the screen clean by rinsing it through the bottom valve.





















0 comments