Collection: ZIP Consumables and replacement cartridges
4 Stages of Advanced Filtration:
Your water quality may affect the longevity and replacement frequency of the filters. The Zero Installation Purifier Countertop Reverse Osmosis Water Filter comes ready to use out of the box. All the filters and reverse osmosis membrane are preinstalled. You don't need to purchase them separately when you buy the filter unless you are purchasing spares for the following filter change.
First Stage Filtration - 5-micron sediment filter with a unique gradient pore structure traps larger particles in its outer layer and smaller ones in the inner layer, effectively removing particles such as sand, sediment, and rust.
MPN: RC-FT-82. Replace every 12 months or as needed.
Second Stage Filtration - Coconut-based activated carbon block filter with high adsorption capability removes harmful chemical residues and carcinogens such as VOCs, THMs, and pesticides, eliminating foul odors and bad taste. MPN: RC-FT-92. Replace every 12 months or as needed. Or an Anti-Scale Version of the Carbon Block Filter for use with extremely hard water.
MPN: RC-FT-90. Replace every 12 months or as needed.
Third Stage Purification - NSF/ANSI 58 Certified reverse osmosis membrane with 75 Gallon Per Day filtration capacity purifies water by blocking virtually all harmful contaminants. It’s the heart of the reverse osmosis system.
MPN: ZIPM75. Replace every 24 months or as needed.
Hardness over 10 gpg (171 mg/L) may reduce the lifespan of the RO membrane. If the filtered water production decreases over time, please replace the RO membrane and substitute the 2nd stage Carbon Block filter with a PPH Anti-Scale Carbon filter to prevent premature RO membrane failure due to hardness build-up.
Fourth Stage - OnliPure™ The specialty Ion Exchange Media inside our OnliPure Post Filter reduces any leftover contaminants after the Reverse Osmosis process to zero TDS. Measure and confirm from your home with a simple TDS meter.
- OR -
AlcaPure™ Polishing Alkaline Post Filter returns beneficial minerals – Calcium and Magnesium to purified water for the best taste. It also increases the alkalinity of the water to a perfectly balanced level of 7-8 pH.
Getting an abnormal filtered water taste is a good indication that the OnliPure Ion-Exchange post-filter has been exhausted and needs replacement.
AlcaPure Post Filter, MPN - RC-ZIPFAP, Replace every 12 months or as needed.
OnliPure Post Filter, MPN: RC-DIPFL2.5x10. Replace as needed.